With the parallel method, UPH is increased by over 10% compared with the traditional online dispensing platform, and the downtime of a single station does not affect the whole line production.
The online AOI method is used to prevent batch defects.
Inclined Rotation Module
Suitable for side dispensing process
360° Rotation Module
Suitable for mushroom head dispensing process
Prevention of Whole Line Downtime
Operation/conveyor track separation
Shutdown of a single machine not affecting the operation of the whole line
Gold wire protection glue
Chip protection glue
Flip Chip underfill
Dust catching glue
FPC reinforcement glue
Conductive silver paste
PIN sealing glue
Professional glue effect testing to improve the reliability of the mounting process.
Dispensing + mounting and mounting + dispensing processes can be considered at the same time, achieving stronger applicability.
The dispensing station is compatible with piezoelectric jetting valves and inclined rotation shafts, meeting the requirements of multi-side dispensing process and high-precision dispensing.
The bond head has the pressure calibration function to facilitate the quantitative management of production.
The mounting system has the one-key calibration function to save the changeover time.
With the parallel method, the downtime of a single station does not affect the whole line production.
Suitable for appearance inspection of various kinds of glue.
To inspect glue overflow, glue breakage, leakage points, scattered points, bubbles and insufficient glue area.
According to the type of Tray, Mark, Mapping and Sorting can be selected to handle NG products.
The stand-alone or on-line mode can be selected according to the application.
Product status inspection before operation
Glue status inspection after operation
Real-Time MES Docking
Upload of production status information in real time
System abnormal status alarm
Reduction of Particle Contamination
Class-100 dustproof design
Rich Configuration Options
Weighing and other configuration options
High Speed and High Precision
Linear motor driving, grating ruler positioning, and mineral casting platform
After precise visual recognition, the single machine completes the flux injection and soldering, effectively improving the welding yield.
Precise control to improve the consistency of solder joint appearance quality.
The servo motor and the grinding screw module are used to ensure high precision, high speed, high efficiency and high consistency of the system during operation.
The repetitive positioning accuracy of the platform can be up to 0.01mm; and in combination with independent core pneumatic controller or jetting valve, high-precision and stable discharge and precise trajectory control of the fluid can be achieved.
The stable glue line width or glue dot diameter of 0.2mm can be achieved by the non-contact method.
Intelligent modules such as intelligent visual recognition, laser height measurement, automatic needle correction, online UV exposure and liquid level detection are available for selection.
The unique dispensing process module is compatible with blowing and suction method for automatic valve cleaning, effectively preventing glue hanging.
Real-time welding pressure inspection to give an alarm when the preset range is exceeded.
Precise energy control to effectively prevent burns around the pad.
Precise pressure control to effectively prevent the pad from collapsing.
Suitable for Automated Production Line
The head and power supply combination occupies a small space and is light-weight.
It supports communication with the MES system, and can be flexibly integrated in the automated production line.